Ensure that the display data cable is not damaged and replace if necessary.
Ensure that the display is connected to the correct port and turned on.The diagnostic lights are not lit after the computer successfully boots to the operating system but there is no display showing. The desktop computer is in a normal on condition. Some Desktops do not have an F12 key, to access the boot options you have to press the ( zero) key at the Dell logo screen.įor information about running and using the ePSA Diagnostics, check out our: Enter the One Time Boot Menu and use the arrow keys to select Diagnostics and press enter. For a Desktop at the Dell logo screen, tap the F12 key.Reconnect one at a time and check if the computer functions. If the computer is not beeping and the Diagnostic LEDs are not flashing or lit? Unplug all connections and remove all media communication devices (for example external monitors).If you cannot find the beep or LED diagnostics code your personal computer displays in any of the media above, contact Dell Technical support directly.
#Tablet screen lights up but no display manual#
#Tablet screen lights up but no display install#
Remove all attached components, reattach the PSU cables and using the PSU test button, install each component individually to test. If after removing the cables from the system board and the PSU LED illuminates, one of the attached devices or components could be faulty.If the LED still does not illuminate when the test button is pressed, the PSU is possibly faulty. If the PSU LED does not illuminate, remove the PSU cables from the system board and test again.Ensure that the power cable is connected to the supply and press the test button to test the PSU. A test button and LED are on the side of the unit where the AC plug is located. All power supply units include a self-test ability in an isolation mode.Ensure that the main power cable and front panel cable are securely connected to the system board.Ensure that the electrical outlet is working by testing it with another device.Ensure that any power strips being used are plugged into an electrical outlet and are turned on.